Changing Posted Message Labels - Lucent Technologies MERLIN LEGEND 6 System Manager's Manual

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System

Changing Posted Message Labels

Planning Guidelines
The availability of the caller identification information may be limited by local-
serving (caller's) jurisdiction, availability, or central office (CO) equipment.
Valid Entries
Each label can have a maximum of seven characters.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes ('),
stars (*), and pound signs (#).
Task List: Changing Trunk Labels
o
Obtain Form 2c, System Numbering: Line/Trunk Jacks.
o
If necessary, read "Labeling" in the Feature Reference for detailed
information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on Form 2c.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for "Lines or Trunks" in
the "Labeling" section of System Programming , Chapter 3, or the summary
programming instructions below.
o
When you have finished, file Form 2c with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Changing Posted Message Labels
Use this procedure to add or change existing posted messages that tell callers
with display telephones now why the called extension does not answer.
To program on the system programming console:
Use the buttons next to the display and line/feature buttons to specify
alphanumeric characters and punctuation for labels. Use the template provided
with the MLX-20L telephone to see which line buttons correspond to which
alphanumeric characters.
More
 Ã Ä
Drop Dial label
U
I
Type line/trunk no.
+ Type label
6
6
6
Dial ext. no.

È Ç Ç
6
Issue 1
February 1998
Page 6-85