AT&T MERLIN Attendant Planning Forms page 6

Remember to set the current date and time for the MERLIN Attendant. Refer to the program-
NOTE:
ming information that came with the unit for further information. If you do not set the MERLIN
Attendant clock, the unit remains in Day mode at all times.
1. Enter authorized caller mode.
a. Dial the MERLIN Attendant extension number from a Touch-Tone phone, preferably a
single-line set.
b. Wait for an answer.
c. Dial [*] immediately followed by your authorized caller code and [#] .
The two-beep confirmation tone sounds.
NOTE: If you are programming from a multiline Touch-Tone phone connected to the
MERLIN LEGEND
additional pound (#) sign each time a pound (#) sign appears in a programming
command.
2. Dial [*] [7] [3] followed by a code for the day of the week.
(1) Sunday, (2) Monday, (3) Tuesday, (4) Wednesday, (5) Thursday, (6) Friday, (7) Saturday,
(9) Entire week - 7 days.
3. Dial two digits for the opening hour (00 through 23) using 24-hour time (00 is midnight).
4. Dial two digits for the opening minute (00 through 59).
5. Dial two digits for the closing hour (00 through 23) using 24-hour time (00 is midnight).
6. Dial two digits for the closing minute (00 through 59).
The two-beep confirmation tone sounds.
NOTE: If you hear the three-beep (error) tone, return to step 2.
7. Repeat steps 2 through 6 of this procedure for each additional day as needed.
8. Continue programming.
o r
Exit authorized caller mode by dialing [*] [#].
9. To disconnect, dial [#].
Planning Form B
How to Program:
TM
Communications System control unit, you must enter an