AT&T MERLIN Attendant Planning Forms page 19

MERLIN Attendant
Planning Form I
This form is used to program routes that combine blind and supervised transfers and to make individual
changes to existing routes (e.g., change one extension number).
Use the programming instructions on the back of this form to enter the information. The front of this form is
set up so that once you have entered authorized caller mode, you can see at a glance the entries you need
to make.
Route
Number
Valid Extension Codes
11 =
Day Primary Extension
12 =
Day Secondary Extension
21 =
Night Primary Extension
22 = Night Secondary Extension
If you are entering a blind transfer (transfer code 2), you cannot use extension codes 12 (Day
NOTE:
Secondary Extension) or 22 (Night Secondary Extension).
Combined Routes/Individual Changes
Extension
Code
Transfer Extension
Code Number
Valid Transfer Codes
0 = No Operation
1 = Supervised Transfer
2 = Blind Transfer
5 = Disconnect
Planning Form I