AT&T Merlin II Installation And Maintenance Manual page 308

TABLE 3-6 BIS-34D Console Administration (continued)
F e a t u r e
Call Restrictions (continued)
2 To assign call
restrictions to phones
(continued)
To copy line assignments
and call restriction
assignments from one
phone to another
Camp On Return Interval
Procedure: Slide T/P switch to P, press Conference
button twice, then follow steps for feature
4 Press Speaker until the green light shows the restrictions
wanted:
Steady green light on = all calls permitted (unrestricted )
Flashing green light = local and intercom calls and calls to
Green light off = intercom calls and calls to numbers on
assigned lists permitted (outward
call restriction)
5
Press Speaker.
6 Press Adm Tel
Press Adm Tel.
1
2 Press Auto Intercom button for new phone.
3
If a steady green light goes on next to the Auto
button and you hear two beeps, go on to step 4. If not, wait
for 2-beep signal or try again later.
4
Press Recall.
5
Press Auto intercom button for phone whose assignments
you want to copy.
When red light next to Adm Tel stops flashing, touch Adm
6
Tel
1 Press Message.
2 Dial #326.
3 Dial number of minutes (1 through 5) before transferred calls
return to originator.
4 Press Message.
lists
numbers on assigned
permitted toll call restriction
—
Optional Features 3-99
Intercom