Administering An Upgraded System; Reprogram Voice Terminals - AT&T Merlin II Installation And Maintenance Manual

Administering an Upgraded System

REPROGRAM VOICE
TERMINALS
3-62 Administering an Upgraded System
Use the printout of the prior system obtained at the
beginning of the procedure for upgrading an existing
system plus the new FM2 planning forms or the new R3
planning forms to readminister the system. See "Get a
Printout of the Existing System" on page 2- 132 if the
printout is not available.
Since the upgraded system has 1ost all previous memory,
you will need to administer the system as though it were a
new system. See, "Administering a New System" on page
3-21 for complete instructions.
Because the printout of the prior system obtained at the
beginning of the procedure for upgrading an existing
system does not include information on individual
stations, you should use the new FM2 planning forms or
the new R3 planning forms to reprogram the voice
terminals in the system. In providing the new (upgraded)
system planning forms, the system administrator should
specifically provide the following information for voice
terminals.
Lines and line
Dial access to line pools, if that is the access method
wanted
Features to be programmed on buttons
BIS/HFAI settings
Ringing Options and
Idle Line Preference
Voice Announcement Enable/Disable
Call Restrictions
pools appearing on buttons
Personalized Ringing