Paging; Loudspeaker Page; Programming Loudspeaker Page Buttons - AT&T MERLIN 3070 Attendant's Manual

Paging

The MERLIN system offers two kinds of paging: Loudspeaker Page and
Group Page. Loudspeaker Page announcements are heard through a
Ioudspeaker system. Group Page announcements are heard through the
voice terminal speaker.

LOUDSPEAKER PAGE

If your company has a loudspeaker system, it is probably set up in zones,
so you can page people in one zone without bothering those in another.
The MERLIN system lets you page as many as three separate zones,
or all zones if you choose. Your system administrator can give you a list
of the areas covered by each zone.
To page someone:
Touch Intercom-Voice or Intercom-Ring.
Lift your handset.
Dial the appropriate Loudspeaker Page code:
When you hear a beep, make your announcement through your
handset.
Hang up.

Programming Loudspeaker Page Buttons

T/P to P Touch the button
To program:
Loudspeaker Page code (listed in the procedure for
Loudspeaker Page)
You may program a button for each of the paging zones (Page-All, Page
1, and so on), so you touch only one button instead of touching an inter-
com button and then dialing a code. The paging codes for programming
are listed in the Loudspeaker Page procedure.
80 for all zones
zone 1
81
82 zone 2
zone 3
83
Dial
T/P to center
+ a
*91
19