Using The Menu System - Barco DCS-200 User Manual

rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using DCS-200's menu system. For
reference, the figure below illustrates the Setup Menu:
SE TUP ME NU
> T r a ns T i m e
Figure 4-7. Setup Menu (sample)
For all setup menus, please note the following important menu rules and conventions:
•
•
•
•
•
•
•
•
•
DCS-200 • User's Guide
Output
Pr eview
The top line names the current menu, in all capital letters.
Subsequent lines typically display two fields:
~
For a listed function, the left-hand field names the function, and the
right-hand field is the function's current parameter or value.
~
For a listed sub-menu, the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow (>>),
indicating that a sub-menu is available.
The "navigation" cursor (>) in the left-hand column indicates the current line on
which action can be taken. This arrow "scrolls" as you rotate the knob.
Scrolling:
~
Turn the ADJUST knob counter-clockwise (CCW) to scroll down.
~
Turn the ADJUST knob clockwise (CW) to scroll up.
To enter a sub-menu, scroll to the desired line and press
Note Throughout this chapter, the term "select" is used as an
abbreviation for "scroll to a menu line and press SEL."
To change a parameter, scroll to the desired line and press
changes to the "edit" cursor (
~
Turn the ADJUST knob CW to increase a value.
~
Turn the ADJUST knob CCW to decrease a value.
To accept a parameter or value, press
navigation cursor.
Note You must press SEL to activate a DCS-200 function.
In the "edit" mode, to exit (or cancel) without changing the original parameter,
ESC
press .
To navigate back up the menu structure, press
up the menu tree by one level.
1.0
>>
>>
Select the Input field to...
#
). Use the ADJUST knob to modify the value:
SEL
. The edit cursor changes back to the
ESC
. Each press takes you back
4. Operation

Using the Menu System

SEL
.
SEL
. The cursor
39