Table of Contents
Advertisement
4. Operation
Understanding Front-Panel Lockout
Use the following steps to enable and disable executive lockout mode:
1.
2.
EX ECUT IVE MODE
Figure 4-78. Executive Mode Menu (sample)
3.
Figure 4-79. Executive Mode Confirmation Message
4.
5.
102
From the Setup Menu, choose the System Menu.
Select Executive Mode. The following submenu appears:
< S E L > = E n a b l e
<ESC> = Cance l
Press SEL. The confirmation message shown in the following illustration appears:
E x e c u t i v e M o d e
Ena bled
Press an input button or LOGO.
The button will blink "fast" to indicate that the system is performing an action such
as an auto acquire, file association, or another action. When the system
completes its tasks for the input, the button blinks "slow" to indicate that the input
is ready to be taken to Program. The input source signal automatically goes to
Program without requiring a Take, regardless of your Auto Take setting.
To disable the front panel executive lockout mode, press and hold the SEL and
ESC buttons simultaneously for 3 seconds. When the button combination is
detected, the system returns to the menu that was displayed before executive
lockout mode was enabled.
DCS-200 • User's Guide
Advertisement
Table of Contents
