Fiat Linea Owner's Handbook Manual page 37

Rain sensor sensitivity adjustment
(Rain sensor) (where provided)
With this function it is possible to adjust
the rain sensor sensitivity according to 4
levels.
To set the required sensitivity level pro-
ceed as follows:
– briefly press button MENU ESC, the
previously set sensitivity "level" will flash
on the display;
– press button + or – for setting;
– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Headlight sensor
(Automatic headlight sensor
sensitivity adjustment)
(where provided)
This function is used to adjust the dusk
sensor sensitivity to three levels (level 1
= minimum, level 2 = medium, level 3 =
maximum); higher the sensitivity, lower
the quantity of external light needed to
switch the headlights on. Proceed as fol-
lows to set:
– briefly press button MENU ESC, the
previously set level will flash on the dis-
play;
36
– press button + or – for setting;
– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Trip B data (Trip B on)
This function may be used to activate (On)
or deactivate (Off) the Trip B (partial trip).
For further information see "Trip com-
puter".
Proceed as follows to switch the function
on and off:
– briefly press button MENU ESC: (On)
or (Off) will flash on the display (accord-
ing to previous setting);
– press button + or – for setting;
– briefly press button MENU ESC to go
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Setting the time (Clock)
This function allows to set the clock
through two sub-menus: "Time" and
"Mode".
Proceed as follows:
– briefly press button MENU ESC, the
display will show the two submenus
"Time" and "Mode";
– press button + or – to switch between
the two submenus;
– select the required option and then
press button MENU ESCbriefly;
- when accessing the "Time" submenu: –
briefly press button MENU ESC,
"hours" will flash on the display;
– press button + or – for setting;
– briefly press button MENU ESC, "min-
utes" will flash on the display;
– press button + or – for setting.