Fiat Linea Owner's Handbook Manual page 158

❒ if at least 1.8 bar pressure is read, re-
store proper pressure (with engine
running and handbrake on) and restart;
❒ drive with the utmost care to the near-
est Fiat Dealership.
WARNING
Remember to inform the
workshop that the tyre has
been treated with a quick repair kit.
Give the instruction booklet to the
tyre repair workshop personnel.
fig. 13
FOR CHECKING AND
RESTORING PRESSURE ONLY
The compressor may also be used for
restoring pressure only. Release coupling
A-fig. 14 and connect directly to the tyre
valve fig. 13. In this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.
F0R0111m fig. 14
CYLINDER REPLACEMENT
PROCEDURE
To replace the cylinder proceed as fol-
lows:
❒ release connection A-fig. 14;
❒ turn anticlockwise the cylinder to re-
place and raise it;
❒ fit the new cylinder and turn it clock-
wise;
❒ connect connection A to the cylinder
and fit the transparent tube B into the
proper space.
F0R0161m
157