Making Connections - DigiTech Whammy DT Owner's Manual

Making Connections

The Whammy DT pedal is extremely easy to set up and use. Follow these steps to get up and
running.
1. Connect your instrument to the instrument
2. Connect from the Whammy's
amplifier.
3. Connect from the MIDI out of a MIDI controller to the
desired.
4. Connect the power supply between an AC outlet and the
5. Turn on your amp and adjust the volume to a desired level.
6. Using the
WHAMMY
Output
rotate the
WHAMMY
Page 4
Output Jack
and
DROP TUNE Footswitches
and knobs to select the desired Effects.
DROP TUNE
.
Input Jack
to your favorite distortion pedal or to your
MIDI In Port
Power Jack
to enable the desired effects, then
on the Whammy, if
on the Whammy.