Bypass Modes - DigiTech Whammy DT Owner's Manual

Bypass Modes

There are two selectable Bypass Modes available in the Whammy DT, they are:
True Bypass
•
DSP Bypass
•
True Bypass Mode
From the factory, the Whammy DT is set to True Bypass Mode. In this mode, the circuitry in the
Whammy DT is completely bypassed when both Whammy and Drop Tune effects are off. If you
have switched to DSP Bypass Mode and would like to switch back to True Bypass Mode, follow
these steps:
1. Start with the power supply disconnected from the Whammy DT.
2. Press and hold the
3. When the
DROP TUNE Effect LED
.
Footswitch
True bypass will now be re-enabled.
Page 14
MOMENTARY Footswitch
flashes red two times, release the
and apply power.
MOMENTARY