Making Connections - DigiTech Whammy DT Owner's Manual

Making Connections

The Whammy DT pedal is extremely easy to set up and use. Follow these steps to get up and run-
ning.
1. Connect your instrument to the instrument
2. Connect from the Whammy's
3. If using an external MIDI device for control, connect from the MIDI out of the MIDI device to the
Whammy's
MIDI Input.
4. Connect the included power supply to an AC outlet and the other end to the Whammy's
Input.
5. Turn on your amp and adjust the volume to the desired level.
6. Use the
WHAMMY
Output
the and
WHAMMY DROP TUNE Knobs
to your favorite distortion pedal or to your ampli er.
Output Jack
and
DROP TUNE Footswitches
to select the desired e ects.
Input Jack.
to enable the desired e ects, then rotate
Power