Avaya 1110 User Manual page 27

Figure 4: Remove the stand cover
2. Connect the AC power adapter (optional). Connect the AC power
adapter (not supplied) to the AC adapter jack in the bottom of the
phone (see Figure
thread the adapter cord through the channel in the stand base. Plug
the AC power adapter into the nearest AC power outlet.
Note: Your Avaya 1110 IP Deskphone supports both AC power and
Power over Ethernet (PoE), including IEEE 802.3af standard power.
To use AC power, use only the Avaya-approved AC power adapter
(RoHS Global Power Supply, PEC #: N0089601), which can be
ordered separately. To use Power over Ethernet (PoE) power, your
connected LAN must support PoE; an AC power adapter is not
required.
5). Form a small bend in the cable, and then
Connect the components
27