Cisco CRS-1 - Carrier Routing System Router Migration Manual page 72

Carrier routing system
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

How to Migrate to a Cisco CRS-3 Carrier Routing System (4-Slot)
DETAILED STEPS
Command or Action
Step 1
admin
Example:
RP/0/RP0/CPU0:router#admin
Step 2
configure
Example:
RP/0/RP1/CPU0:router(admin)#configure
Step 3
hw-module power disable loc 0/SM0/SP
Example:
RP/0/RP1/CPU0:router(admin-config)# hw-module
power disable loc 0/SM0/SP
Step 4
commit
Example:
RP/0/RP1/CPU0:router(admin-config)# commit
Step 5
end
Example:
RP/0/RP1/CPU0:router(admin-config)# end
Step 6
show platform
Example:
RP/0/RP0/CPU0:router(admin)#show platform
Example
The following example shows commands to disable power to the CRS-1 Fabric Card:
RP/0/RP0/CPU0:router#admin
RP/0/RP0/CPU0:router(admin)#config
RP/0/RP0/CPU0:router(admin-config)#hw-module power disable loc 0/SM0/SP
RP/0/RP0/CPU0:router(admin-config)#commit
RP/0/RP0/CPU0:router(admin)#show platform
Node
<snip>
0/SM0/SP
0/SM1/SP
0/SM2/SP
0/SM3/SP
0/SM4/SP
0/SM5/SP
0/SM6/SP
0/SM7/SP
<snip>
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
1-62
Purpose
Places the router in administration EXEC mode.
Places the router in administration configuration mode.
Disables the power to the specified fabric plane in your
single-chassis system.
Commits the target configuration to the router running
configuration.
Changes the mode from administration configuration mode
to administration EXEC mode.
Displays the power status of all eight fabric planes.
Type
PLIM
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
FC/S(SP)
N/A
Chapter 1
Migrating to a Cisco CRS-3 Carrier Routing System
All commands listed in this procedure should be
entered on the pre-existing single-chassis system.
This step brings up the previously shutdown plane,
which is now configured to use the CRS-3 fabric card.
Verify that the fabric card in node 0/SM0/SP is in the
UNPOWERED state.
State
UNPOWERED
IOS XR RUN
IOS XR RUN
IOS XR RUN
IOS XR RUN
IOS XR RUN
IOS XR RUN
IOS XR RUN
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
OL-13669-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crs-3

Table of Contents