Cisco CRS-1 - Carrier Routing System Router Migration Manual page 230

show controllers (Ethernet)
All of 10 clock/data recovery units are locked.
None of 10 TX FIFO has underflow/overflow condition.
None of 10 RX FIFO has underflow/overflow condition.
CFP section:
==============
CFP General Information:
Module Identifier:
Ethernet Application Code: 100GE-LR4
Module State:
Power Class:
Maximum Power Consumption: 23000 mW
CFP Vendor Information:
Vendor Name:
Vendor PN:
Vendor SN:
Vendor OUI:
Lot Code:
DATE CODE(YY/MM/DD): 2010/08/05
Hardware Version:
Firmware Version:
CFP UDI Information:
UDI Compliant: Yes
CISCO PID: CFP-100G-LR4
CISCO VID: VES1
CFP Detail Information:
...
Module Analog A/D value:
Power supply voltage : 3.2915 V
Temperature
Network lane A/D value:
Lane 0 Tx power: 0.0
Lane 1 Tx power: 0.0
Lane 2 Tx power: 0.0
Lane 3 Tx power: 0.0
Lane 0 Rx power: 0.0
Lane 1 Rx power: 0.0
Lane 2 Rx power: 0.0
Lane 3 Rx power: 0.0
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
3-70
Chapter 3 Cisco CRS-3 Carrier Routing System Router Command Changes
CFP
Low Power
3
FINISAR CORP.
FTLC1181RDNS-C1
C22CS58
0x0-0x90-0x65
00
1.3
1.5
: 16.7917 degC
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
mW (-40 dBm)
OL-13669-03