Tcp/Ip; Ip Addr. Setting - Konica Minolta magicolor 1690MF Reference Manual

TCP/IP

Purpose
Options
Default

IP ADDR. SETTING

Purpose
Options
Default
Range
Notes
5-8
Enables or disables TCP/IP.
If is selected, TCP/IP is enabled.
ENABLE
If is selected, TCP/IP is disabled.
DISABLE
DISABLE/ENABLE
ENABLE
Sets the IP address of this machine on the network.
Sets the subnet mask of the network. The subnet mask
allows you to limit access to your machine (for example,
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and you allow users outside
your network environment to print on your machine.
AUTO/SPECIFY
AUTO
(If IP ADDR. SETTING is set to SPECIFY)
IP ADDRESS: 0.0.0.0
SUBNET MASK: 255.255.255.0
GATEWAY: 0.0.0.0
(If IP ADDR. SETTING is set to SPECIFY)
0-255 for each xxx triplet
Use the keypad to input each number; use the
keys to move between triplets.
A single digit number, such as "1", cannot be input as "001".
Align the number on the left and input "1" as "1 _ _". Use
the and ) keys to move between triplets.
*
The Back key can also be used for deleting. To cancel IP
Address menu, hold down the Back key for more than one
second, and then press the Back key again after all set-
tings have been cleared.
NETWORK SETTING Menu
and )
*