Singular Feeding Of Cut Sheet Media - Konica Minolta KIP 9900 User Manual

2. 4. 2

Singular feeding of cut sheet media

Larger cut sheet media than A2 (594mm) or 24" can be fed into KIP 9900 by singular feeding only.
NOTE
Do not leave the cut sheet media on the Bypass Feeder for a long time as it will get
moisture. Such media will result in mis-feed or defective image. (Keep the media in a plastic
bad to block the moisture.)
1. Select the bypass feeding mode on the outer device.
2. Slide the Cut Sheet Guides and place at the
requested size guides.
3. Put the media on the Bypass Feeder and move it forward until the leading edge contacts the
feeding roller.
Feeding roller
2-18
Cut Sheet Guide
Chapter 2 Basic Operations