Neoware c50 - Thin Client User Manual page 94

Setup Menus
Formfeed
This is always set to Don't Report. The Paper Source 1 option is used to specify the
paper format to be used.
Paper Source 1 & 2
These options specify the paper format to be used. The possible settings are:
Don't Report
Envelope Hopper
This specifies the envelope format to be used. The possible settings are:
Don't Report
8-20
No value returned.
*NONE No paper source is defined.
*MFR The system determines the paper type used based on
the manufacturer, type and model of the printer.
*LET Letter-sized paper (8.5 x 11 inches).
*LEGL Legal-sized paper (8.5 x 14 inches).
*EXEC Executive-sized paper (7.25 x 10.5 inches).
*A4 A4-sized paper (210 mm x 297 mm).
*A5 A5-sized paper (148 mm x 210 mm).
*B5 B5-sized paper (182 mm x 257 mm).
*C80 Continuous-form paper, 8.0 inches wide
(Paper Source 1 only).
*C132 Continuous-form paper, 13.2 inches wide
(Paper Source 1 only).
*A3 A3-sized paper (297 mm x 420 mm).
*B4 B4-sized paper (257 mm x 364 mm).
*LEDG Ledger-sized paper (11 inches x 17 inches).
No value returned.
*NONE No envelope source is defined.
*MFR The system determines the envelope type used based on
the manufacturer, type and model of the printer.
*B5 B5-sized envelopes (176mm x 250mm).
*MON Monarch-sized envelopes (3.875 x 7.5 inches).
*N9 Number 9-sized envelopes (3.875 x 8.875 inches).
*N10 Number 10-sized envelopes (4.125 x 9.5 inches).
*C5 C5-sized envelopes (162mm x 229mm).
*DL DL-sized envelopes (110mm x 220mm).