General Operation & Setup - Neoware c50 - Thin Client User Manual

General Operation & Setup
Server For TeemTalk Display & Input
Resource:
Command Line: -display host:server.screen
Default Setting: Determined by the DISPLAY environment variable.
These commands specify which X server is to be used to display data and take input
when TeemTalk is being run on a remote system.
The host argument specifies the machine which will display the TeemTalk window.
This is immediately followed by a colon then the server number, then the screen
number preceded by a period. The host and .screen arguments may be omitted, in
which case host will be the local machine and .screen will be .0 by default. The server
option must always be preceded by a colon.
Command line example:
xteemx340 -d your_node:0.1
This will select your_node, server 0 and screen 1 for TeemTalk display and input.
Synchronization Signal Frequency
Resource:
Command Line: -poll seconds
Default Setting: 5
These commands determine how often TeemTalk sends a synchronization signal to the
X server to check that it is still alive.
Run Program Instead Of Standard Shell
Resource:
Command Line: -program program_name
Default Setting: Not applicable
These commands enable a program to be run instead of the standard shell. Program
arguments are specified by the following resource or command line option:
Resource:
Command Line: -arguments program_arguments
Default Setting: Not applicable
xteemx340*display: host:server.screen
xteemx340*pollTime: seconds
xteemx340*program: program_name
xteemx340*arguments: program_arguments
Resources & Command Line Options
25-7