Getting Started
characters for the equivalent button on the screen. These are followed by the definition
line which contains an escape sequence by default. Each definition can contain up to
50 ASCII characters.
To program an f-key, press the F1 key to move the cursor to the relevant line and use
the cursor keys to move from one section of the line to another. You must press the
F1 key to end each definition line entry so that extra space characters are not sent to
the host. Note that using the cursor keys to move to the next line will cause the
remainder of the definition line to be sent as spaces.
When you have finished defining the f-keys, press F7 to save the definitions and exit
from the menu. If you want to exit without saving the settings, press F8.
3-10