Neoware c50 - Thin Client User Manual page 131

Setup Menus
Enter Key
Factory default: Return
This option enables you to specify whether the Enter key performs the same function
as the Return key or the Send key.
Return Key
Factory default: Field
This option specifies whether or not the cursor can enter a line within a protected field
when the Return key is pressed.
When set to Field, the result of pressing the Return key is determined by the setting of
the Auto New Line option and the cursor will move to the next unprotected line.
When set to New Line, the result of pressing the Return key is determined by the
setting of the Auto New Line option.
Send Operation
Factory default: Page
The setting of this option determines the effect of pressing the Send and Send Line
keys.
When set to Page, the contents of the current page will be sent to the host when Send
is pressed, or the current line if Send Line is pressed.
When set to Line, the contents of the current line will be sent to the host when Send is
pressed, or the current page if Send Line is pressed.
Model
Factory default: 11
This option identifies the terminal model being emulated in response to a terminal
identification request from the host. Model 11 supports only one viewport containing
24 or 25 rows and 80 columns. Model 31 supports up to three viewports (80 or 132
columns wide) and pass-through printing.
Terminal ID
Factory default: Unspecified
This specifies what is reported back to the host in response to a terminal identification
request. (Note that not all features of the specified terminal may be supported.) The
entry can be up to 20 characters long.
Auto Wrap
Factory default: Selected
The setting of this option determines what happens to the cursor and data sent to the
display when the end of the current line is reached.
8-57