Neoware c50 - Thin Client User Manual page 268

File Transfer
End of line char
Factory default: CTRL-M (i.e. CR)
This specifies the character which terminates the packet.
Quote char
Factory default: #
This specifies the character used to indicate that the next character is in the decimal
range 0 - 31, 128 - 159, or is a delete character (127).
Packet size
Factory default: 80
This specifies the maximum byte size of a packet from the sequence number byte and
including the checksum characters.
Checksum Type
Factory default: 1-Byte
This specifies the type of checksum computation used.
1-Byte and 2-Byte selects the standard Kermit 1-byte and 2-byte checksum computa-
tions, respectively. 3-Byte-CRC selects a cyclic redundancy checksum computation
which is useful when operating on noisy lines or transferring large packets.
22-10