Table of Contents
Advertisement
Altos RAIDWatch User Guide
6.8 Communication
To be able to configure the Communication settings, select the
Figure 6–15, from the Configuration View Window Tabs.
Figure 6–15
• TCP/IP: To set the TCP/IP settings, select the
• Network Hardware MAC: A DHCP client identifies itself to the server using its network
Figure 6–16
Figure 6–17
• RS232 Port: To set the RS-232 serial port settings, select the RS-232 tab.
• COM Port Select: Select the serial port that will be used for serial port connection. please refer
82
Select the Communication Tab
hardware (MAC) address. See Figure 6–16.
Setting the Network Hardware MAC
• Set IP Address: IP settings are shown in Figure 6–17.
Set IP Address
– IP Assignment: Select any of the following options: Static, DHCP, BOOTP, RARP, or NONE.
– IP Address: Input the IP Address assigned to the subsystem.
– Subnet Mask: Enter a Subnet Mask that will be used by the subsystem e.g. 255.255.0.0.
– Default Gateway: Enter the default value into this field e.g. 192.168.1.254.
to Figure 6–18.
Communication
TCP/IP
tab.
tab, as shown in
Advertisement
Table of Contents
