12.2 Before You Begin
• Event Monitor must be installed with Altos RAIDWatch Manager. Executing the program does
not require running Altos RAIDWatch Manager program. However, RAID agents are necessary
to be running as the communication bridges between controller and RAID servers.
• Event Monitor can be running locally or remotely via browser.
• When running remotely via browser, Java Applet will be started. Connection to an http server
providing "
• Files listed below are necessary on an http server for accessing Event Monitor remotely over
network:
File type
HTML
Jar
Multi-language support
OEM definitions
Help files if online help is preferred
• When Java Applet is started, a prompt will require IP address of a Primary Agent server.
Connection to other Primary agents can be established through the program's menu
commands.
12.2.1 Basic Running Requirements
This program shares Java class with Altos RAIDWatch Manager. Both software must be installed for
running Event Monitor. It must be started manually (and re-run after a host computer reset).
• Please be sure that your system meets the system requirements listed in Chapter 2.
• The RAID disk arrays are properly installed.
• There is no need for configuration. Remote management is possible by connecting to an http
server providing access to
GREM.htm
" is necessary.
"GREM.htm"
File name
grem.htm
grm.htm
grem.jar
grm.jar
IFTBundle_0
IFTBundle_1
...
em_oemname
oemname
oemlogo
default.enc
/help
/em_help
and other necessary files in its web page root directory.
Event Monitor
159