Table of Contents
Advertisement
4
Click OK. When prompted for a password, enter it and click OK. The LUN mapping should no longer
be listed in the LUN Map table. In the example shown in Figure 9–19. LUN 6 was selected. After
deleting the LUN mapping it no longer appears in the LUN Mapping table. See Figure 9–10 on
page 125.
Figure 9–20
5
To remove additional LUN mappings, repeat step 2.
9.3 Extended LUN Mapping
Extended LUN Mapping adds extra functionality to the normal LUN Mapping, which only allows
you to assign LUNs. Extended LUN mapping provides users with added masking and filtering
features. This enables users to restrict access to specified LUNs. It also enables users to assign
different access modes (Read and Write or Read only) to pre-specified LUNs.
9.3.1 Preliminaries
• Before you can use the Extended LUN Mapping feature you must first create the logical drives
and logical volumes.
• If you want to use Extended LUN Mapping to map an entire logical drive or logical volume,
make sure that the logical drive or volume is
• If you want to use the Extended LUN Mapping to map a logical drive partition or logical
volume partition, make sure that the logical drive and volumes are partitioned
accessing the Extended LUN Mapping Feature.
9.3.2 Extended LUN Mapping
1
Follow the steps listed in section 9.2.1 to access the LUN Map Table shown in Figure 9–3
2
Select the LUN Mapping tab shown at the top of the LUN Map Table. A new screen will appear in
the content window. From this screen first select the Add sub-tab, and then click on the Extended
LUN sub-tab. (See Figure 9–21).
Deleted LUN
NOT
partitioned.
LUN Mappimg
before
129
Advertisement
Table of Contents
