Tool Bar; Common Commands - Acer Altos RAIDWatch Manual

Management program

Table of Contents

Altos RAIDWatch User Guide

4.5.3 Tool Bar

Altos RAIDWatch Manager provides a toolbar located just beneath the menu bar for displaying key

command buttons. These buttons serve various purposes, which are described in detail in this

section.

Figure 4–9

4.5.4

The following commands appear both in the Navigation Menus described in Section4.5.2 and the

Tool Bar described in section 4.5.3.

• The Connect command button is used for connecting to a disk array system. This button has

Note

Multiple simultaneous Altos RAIDWatch Manager connects to one Secondary agent is not a

supported function.

• The Disconnect command button is used for disconnecting from a disk array system. This

• The Enclosure command button displays the Enclosure window for displaying and configuring

• The RAID View command button displays the configuration and control window for the

• The Event Log command button opens the Event Log window for displaying the array event

• The Statistics command button displays the Statistics window for viewing activity (Cache hits

• The Tile command button arranges the displayed windows by giving each an equal share of

Tool Bar

the same function as the Connect command under the File menu.

button has the same function as the Disconnect command under the File menu. (Note that

Disconnect does not close Altos RAIDWatch Manager.)

custom enclosures. This button provides the same function as the Enclosure command under

the Open menu.

controller and drives. This button provides the same function as the RAID View command

under the Open menu.

log. This button provides the same function as the Event Log command under the Open menu.

or Read/Write) on the disk array system. This button provides the same function as the Statistics

command under the Open menu.

the available application window space. This button has the same function as the Tile In-

Window command under the View menu. (Note: The Tile In-Sequence function listed under

View is not currently available.)

Table of Contents