Table of Contents
Advertisement
Table A–4
Command
Open <O>
Close <C>
Altos
RAIDWatch
<R>
Exit <E>
Event Monitor About Menu Commands
Table A–5
Command
Help <H>
About <A>
A.3 Command Buttons
This section describes the various command buttons provided to facilitate execution of commonly
used commands. These buttons are on the toolbar.
Table A–6
Command
Button
Connect
Disconnect
Enclosure
RAID View
Event Log
Event Monitor Connect Menu Commands
Description
Connects Event Monitor to a particular disk array system.
Disconnects Event Monitor from a particular disk array system.
When a disk array IP address is selected, this command opens the Altos RAIDWatch
Manager application.
Closes the Event Monitor application.
Description
Displays on-line help.
Displays information about the Event Monitor program.
Command Buttons
Description
Connects Altos RAIDWatch Manager to a particular disk array system for
management. This command has the same function as the Connect command
in the File menu.
Disconnects from the current disk array system, terminating the current
management session with the device but not exiting Altos RAIDWatch
Manager. This command has the same function as the Disconnect command in
the File menu.
Displays the Enclosure window. This button has the same function as the
Enclosure command in the Open menu.
Displays the main RAID View window. This button has the same function as the
RAID View command in the Open menu.
Displays the Event Log window. This button has the same function as the Event
Log command found in the Open menu.
Command Summary
175
Advertisement
Table of Contents
