Table of Contents
Advertisement
7
From the LUN Selected drop-box in Figure 9–8, choose the LUN ID that will be assigned to the LD
(or LV). Only unused IDs will be listed.
Figure 9–8
8
Next, click on the partition 0 icon. "Partition 0" should appear, as shown in Figure 9–9, in the
Partition Selected box. Click OK and enter the password when prompted.
Figure 9–9
9
If you choose the LUN Table, the newly mapped LUN should now be listed, as seen in Figure 9–10.
:
Figure 9–10
9.2.2
Map a logical drive or volume partition to a host LUN
1
First, partition the logical drive or logical volume.
2
Follow the steps listed in section 9.2.1 above to access the LUN Map Table shown in Figure 9–3.
3
Select the LUN Mapping tab shown at the top of the LUN Map Table. A new screen will appear in
the content window. From this screen first select the Add sub-tab, and then click on the LUN sub-
tab. (See Figure 9–11).
Available LUNs
Partitioned Selected
Listed LUN Mapping
LUN Mappimg
125
Advertisement
Table of Contents
