Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
Expand Drivers -> Altos G5450 -> Chipset and double-click on Windows
2.
Vista.
Follow the instruction and use the default setting to install all of the
3.
drivers and utilities in the driver package.
After all drivers and utilities are installed, please reboot the system.
4.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver is included in the chipset driver package. The
Gigabit Ethernet driver would be installed automatically when you installing
the chipset driver package.
RAID Utility Installation
For installing the MegaRAID Storage Manager for the LSI MegaRAID SAS
1.
8708ELP, please insert the EasyBUILD 7.1 build 600 (or later) into the
optical drive.
Expand Utilities -> Altos G5450 -> LSI MegaRAID SAS 8708ELP, select
2.
MegaRAID Storage Manger (Windows Vista x64) and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Windows Vista Enterprise Edition Installation (with onboard
SATA RAID)
Below information describes how to manually install Windows Vista Enterprise
Edition on Altos G5450 with onboard SATA RAID.
Drivers Required
For Windows Vista Installation, the following device drivers are required.
Device
Onboard SATA
RAID
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for onboard SATA RAID can be found in the EasyBUILD
50
Version
Directory on EasyBUILD
5.10.2600.931
\Disk\g5450\onboard\sataraid\vista\
Package 9.31
\Disk\g5450\onboard\Chipset\vista\
65.5.5.0
Including in chipset driver package
9.31
N/A
OS built-in
N/A
OS built-in
Advertisement
Table of Contents
