Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 4 Installation, the following device
drivers are required.
Device
LSI MegaRAID SAS
8708ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for MegaRAID SAS 8708ELP can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix B. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
Since Red Hat Enterprise Linux 4.0 Update4 cannot recognize the
1.
MegaRAID SAS 8708ELP, you need to make a driver diskette from the
EasyBUILD 7.1 build 600 (or later) first before the installation.
Type linux dd when the prompt boot: appears at the start.
2.
Please select the fd0 as the Driver Disk Source.
3.
Follow the instruction to load the driver for MegaRAID SAS 8708ELP from
4.
the driver diskette.
If you have installed the ATI FireGL V5200 in the system, you need to
5.
install additional package at the Package Installation Defaults. If you use
the onboard XGI Z9s, please follow the instructions to finish the
installation directly.
At the Package Installation Defaults, select Customize software packages
6.
to be installed.
At the Package Group Selection step, select Development Tools and under
7.
Development.
72
Version
Directory on EasyBUILD
00.00.03.06
\Disk\g5450\sas\8708elp\rh4u4\
N/A
OS built-in
0.60
\Disk\g5450\nic\Nvidia\rhel4ud4\
1.2.53
\Disk\g5450\onboard\xgiz9s\rhel4ud4\
8.35.5
N/A
Version
Directory on EasyBUILD
2.07-00
\app\g5450\sas\8708ELP\Linux\
Advertisement
Table of Contents
