Table of Contents
Advertisement
please insert the EasyBUILD 7.1 build 600 into the optical drive.
Expand Utilities -> Altos G5450 -> LSI MegaRAID SAS 8708ELP, select
2.
MegaRAID Storage Manager (Windows XP x64) and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At the Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows XP Professional x64 Edition SP2 Installation (with LSI
MegaRAID SAS 8204ELP)
Below information describes how to manually install Windows XP Professional
x64 Edition on Altos G5450 with MegaRAID SAS 8204ELP installed.
Drivers Required
For Windows XP x64 Installation, the following device drivers are required.
Device
MegaRAID SAS
8204ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for MegaRAID SAS 8204ELP and NIC can be found in
the EasyBUILD 7.1 build 600 (or later).
Software
MegaRAID Storage
Manager
ForceWare Network
Access Manager
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix C. for the LSI MegaRAID SAS 8204ELP
55
Version
Directory on EasyBUILD
07.15.0209.20
\Disk\g5450\sas\8204elp\x64\wsxp\
07
Package 9.18
\Disk\g5450\onboard\Chipset\x64\wsxp
\
65.2.0.0
Including in chipset driver package
9.18
6.14.10.1080
\Disk\g5450\onboard\xgiz9s\x64\wsxp\
8.323.1.0
\Disk\g5450\graphic\V5200\x64\wsxp\
Version
Directory on EasyBUILD
2.07-00
\app\g5450\sas\8204ELP\Windows\
65.16
Including in chipset driver package
9.18
Altos G5450 Installation Configuration Guide
Advertisement
Table of Contents
