Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
VGA Driver Installation (ATI FireGL V5200)
NOTE. With ATI FireGL V5200 installed, the onboard VGA still can work as
secondary VGA output. After you install the ATI FireGL V5200 driver, you still
need to install the XGI Z9s driver.
You will see two Standard VGA Graphics Adapter under Display Adapter
1.
and one Video Controller under Other Device in Windows Server 2003
Device Manager for both ATI FireGL V5200 and XGI Z9s.
You can find the ATI FireGL V5200 driver in EasyBUILD 7.1 build 600.
2.
Please insert the EasyBUILD 7.1 build 600 into the optical drive.
Expand Drivers -> Altos G5450 -> Graphics adapters -> ATI FireGL V5200,
3.
select Windows Server 2003 and click on Setup.
Follow the instruction to install the VGA driver.
4.
Please reboot the server after the driver is installed.
5.
After the system rebooted, you will see the following message on the
6.
screen.
Please right-click on desktop and select Properties.
7.
34
Advertisement
Table of Contents
