Table of Contents
Advertisement
Altos G5450 Installation Configuration Guide
# cd /tmp/
# ./install.sh
Type y to accept the license agreement and select 3 for StandAlone
3.
installation.
To start MegaRAID Storage Manager, click on Applications and select
4.
System Tools -> MegaRAID Storage Manager StartupUI.
Red Hat Enterprise Linux 4.0 EM64T Update 4 Installation (with
LSI MegaRAID SAS 8204ELP)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 EM64T Update 4 on Altos G5450 with LSI MegaRAID SAS 8204ELP.
Drivers Required
For Red Hat Enterprise Linux 4.0 EM64T Update 4 Installation, the following
device drivers are required.
Device
LSI MegaRAID SAS
8204ELP
Onboard NVIDIA
NFP3600 Chipset
Onboard NVIDIA
nForce Networking
Controller
Onboard XGI Z9s
ATI FireGL V5200
Software Required
The management utility for LSI MegaRAID SAS 8204ELP can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix C. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
Since Red Hat Enterprise Linux 4.0 EM64T Update4 cannot recognize the
1.
MegaRAID SAS 8204ELP, you need to make a driver diskette from the
EasyBUILD 7.1 build 600 (or later) first before the installation.
Type linux dd when the prompt boot: appears at the start.
2.
68
Version
Directory on EasyBUILD
07.15.0209.20
\Disk\g5450\sas\8204elp\x64\rh4u4\
07
N/A
OS built-in
0.60
\Disk\g5450\nic\Nvidia\x64\rhel4ud4\
1.2.53
\Disk\g5450\onboard\xgiz9s\x64\rhel4u
d4
8.35.5
N/A
Version
Directory on EasyBUILD
2.07-00
\app\g5450\sas\8204ELP\Linux\
Advertisement
Table of Contents
