Table of Contents
Advertisement
Altos R920 Installation Configuration Guide
Server 2008 x64 and click on Setup.
3.
Follow the instruction to install the driver and reboot
the server after the chipset driver is installed.
Gigabit Ethernet Driver Installation
1.
There is built-in Ethernet controller driver with Widows
Server 2008 x64. Please update the driver with EasyBUILD.
Please do the same on both of the Gigabit Ethernet
devices.
2.
Please insert the EasyBUILD into the optical drive
3.
Expand Drivers -> Altos R920 -> Network adapters ->
Intel 82563EB Gigabit Ethernet Controller, select Windows
Server 2008 x64 and click on Setup.
4.
After installing the driver, you would see Intel(R)
PRO/1000 EB Network Connection with I/O Acceleration
listed in Network adapters.
IOAT Driver Installation
The Base System Device with yellow mark in Device Manger is
the IOAT device. After the Gigabit Ethernet controller driver
installation completed at previous step, you would see Intel
7300 Chipset QuickData Technology Device listed in System
devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device.
You can find the ATI ES1000 driver in EasyBUILD. Please
insert the EasyBUILD into the optical drive.
2.
Expand Drivers -> Altos 920 -> Graphics adapters -> ATI
ES1000, select Windows Server 2008 x64 and click on Setup.
3.
Follow the instruction to install the VGA driver and
reboot the server after the driver is installed.
Gigabit Ethernet Driver Installation (I/O Expansion Module)
If the optional I/O Expansion module is installed on Altos
R920, there are two additional Gigabit Ethernet available on
Altos R920.
The driver for the two additional Gigabit Ethernet will be
installed automatically if you've installed the onboard
Gigabit Ethernet driver at previous step.
RAID Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
10
Advertisement
Table of Contents
