Table of Contents
Advertisement
Software Required
The management utility of LSI MegaRAID SAS 8708ELP is required.
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8708ELP
Please refer to the Appendix D. for the LSI MegaRAID SAS 8708ELP
configuration.
Installation Tips
Please prepare the driver diskette for MegaRAID SAS 8708ELP before the
1.
installation.
Boot the system form SUSE Linux Enterprise Server 10 bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Please insert the driver disk into the floppy drive then press Enter to
4.
continue the installation.
The system will automatically load the driver from floppy. After loading
5.
the driver, select OK and Back to return the installation procedure.
Follow the instructions to the Installation Settings.
6.
At the Installation settings, select the Software.
7.
Check C/C++ Compiler and Tools under Development to add C/C++
8.
compiler tools.
Click on Details, change Filter from Patterns to Package Groups.
9.
Select Source under Development in the left window and check kernel-
10.
source in the right window to add kernel-source.
After you add the kernel-source and C/C++ Compiler and Tools, please
11.
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.
Please refer to the SuSE Linux Enterprise Linux 10 Installation (with LSI
MegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.
MegaRAID Storage Manager Installation
The MegaRAID Storage Manager installation is the same as LSI MegaRAID SAS
8300XLP installed. Please refer to the SuSE Linux Enterprise Linux 10 Installation
(with LSI MegaRAID SAS 8300XLP) MegaRAID Storage Manager Installation
section.
71
Version
Directory on EasyBUILD
2.21-00
N/A
Altos G540 Installation Configuration Guide
- Quick Links:
- Board Layout
Hide quick links:
Advertisement
Table of Contents
