Table of Contents
Advertisement
Installation (with LSI MegaRAID SAS 8300XLP) MegaRAID Storage Manager
Installation section.
SUSE Linux Enterprise Server 10 Installation (with LSI MegaRAID
SAS 8300XLP)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 on Altos G540 with LSI MegaRAID SAS 8300XLP installed.
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required.
Device
LSI MegaRAID SAS
8300XLP
Onboard Intel
5000P Chipset
Onboard Intel
82563EB Gigabit
Ethernet
Onboard ATI
ES1000
Onboard USB 2.0
IOAT
Software Required
The management utility for MegaRAID SAS 8300XLP is required.
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8300XLP
Please refer to the Appendix C. for the LSI MegaRAID SAS 8300XLP
configuration.
Installation Tips
Please prepare the driver diskette for MegaRAID SAS 8300XLP before the
1.
installation.
Boot the system form SUSE Linux Enterprise Server 10 bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Please insert the driver disk into the floppy drive then press Enter to
4.
continue the installation.
The system will automatically load the driver from floppy. After loading
5.
67
Version
Directory on EasyBUILD
00.00.03.07
N/A
N/A
OS built-in
7.3.15-NAPI
\Disk\G540\NIC\Intel\pro1000.lx
N/A
OS built-in
N/A
OS built-in
N/A
N/A
Version
Directory on EasyBUILD
2.21-00
N/A
Altos G540 Installation Configuration Guide
- Quick Links:
- Board Layout
Hide quick links:
Advertisement
Table of Contents
