Table of Contents
Advertisement
Altos G540 Installation Configuration Guide
ES1000
Onboard USB 2.0
IOAT
Software Required
The management utility for LSI 1068 SAS can be found in the EasyBUILD 7.1
build 200 (or later).
Software
MyStorage
Configuring LSI 1068 SAS
Please refer to the Appendix B. for the LSI 1068 SAS IM configuration.
Installation Tips
Although Red Hat Enterprise Linux 4.0 EM64T Update 3 can detect the LSI 1068
SAS automatically, we still need to update the driver during the installation. If
you don't update the driver, the LSI MyStroage management software will not
recognize the LSI 1068 SAS.
Please make the driver diskette from the EasyBUILD 7.1 build 200 (or later)
1.
first before the installation.
Type linux dd updates when the prompt boot: appears at the start.
2.
Please select the fd0 as the Driver Disk Source.
3.
Follow the instruction to load the LSI 1068 SAS driver from the driver
4.
diskette.
At Update Disk Source, please select fd0 and follow the instruction to
5.
update it.
At the Package Installation Defaults, select Customize software packages
6.
to be installed.
At the Package Group Selection step, select Development Tools under
7.
Development.
Follow the normal procedure to finish the installation.
8.
Gigabit Ethernet Driver Installation
The NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.
Please refer to the Red Hat Enterprise Linux 4.0 EM64T Update3 Installation
(with LSI MegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.
MyStorage Installation
You can find the MyStorage in EasyBUILD 7.1 build 200. Please refer to
1.
Directory of EasyBUILD in Software Required section for the MyStorage
and copy the utility from the EasyBUILD 7.1 build 200 to HDD first.
54
N/A
OS built-in
N/A
N/A
Version
Directory on EasyBUILD
3.00.05
\APP\G540\SAS\LSI068\MyStorage\Linux\
- Quick Links:
- Board Layout
Hide quick links:
Advertisement
Table of Contents
