Table of Contents
Advertisement
Please insert the driver disk into the floppy drive then press Enter to
4.
continue the installation.
The system will automatically load the driver from floppy. After loading
5.
the driver, select OK and Back to return the installation procedure.
Follow the instructions to the Installation Settings.
6.
At the Installation settings, select the Software.
7.
Check C/C++ Compiler and Tools under Development to add C/C++
8.
compiler tools.
Click on Details, change Filter from Patterns to Package Groups.
9.
Select Source under Development in the left window and check kernel-
10.
source in the right window to add kernel-source.
After you add the kernel-source and C/C++ Compiler and Tools, please
11.
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.
Please refer to the SuSE Linux Enterprise Linux 10 EM64T Installation (with LSI
MegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.
MegaRAID Storage Manager Installation
The MegaRAID Storage Manager installation is the same as LSI MegaRAID SAS
8300XLP installed. Please refer to the SuSE Linux Enterprise Linux 10 EM64T
Installation (with LSI MegaRAID SAS 8300XLP) MegaRAID Storage Manager
Installation section.
SUSE Linux Enterprise Server 10 EM64T Installation (with LSI
MegaRAID SAS 8708ELP)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 EM64T on Altos G540 with LSI MegaRAID SAS 8708ELP.
Drivers Required
For SUSE Linux Enterprise Server 10 EM64T Installation, the following device
drivers are required.
Device
LSI MegaRAID SAS
8708ELP
Onboard Intel
5000P Chipset
Onboard Intel
82563EB Gigabit
Ethernet
Onboard ATI
65
Version
Directory on EasyBUILD
00.00.03.09
N/A
N/A
OS built-in
7.3.15-NAPI
\Disk\G540\NIC\Intel\pro1000.lx
N/A
OS built-in
Altos G540 Installation Configuration Guide
- Quick Links:
- Board Layout
Hide quick links:
Advertisement
Table of Contents
