Windows Server 2008 Enterprise X64 Edition Installation (With Lsi Megaraid Sas 8708Elp); Raid Utility Installation; Network Utility Installation; Bios Required - Acer Altos G540 Installation & Configuration Manual

RAID Utility Installation

For installing Matrix Storage Manager for onboard SATA RAID, please
1.
insert the EasyBUILD 8.0 build 200 into the optical drive.
Expand Utilities -> Altos G540 -> Onborad SATA RAID, select Matrix
2.
Storage Manager and click on Setup.
Follow the instruction and accept the license agreement.
3.
When you see the Windows Security warning message on the screen,
4.
please select "Install this driver software anyway".
Please reboot the system after installation is completed.
5.

Network Utility Installation

The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise x64 Edition Installation (with
LSI MegaRAID SAS 8708ELP)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos G540 with LSI MegaRAID SAS 8708ELP.

BIOS Required

Altos G540 BIOS (or later) is required to support Windows Server 2008.
P17

Drivers Required

For Windows Server 2008 x64 Installation, the following device drivers are
required.
Device
LSI MegaRAID SAS
8708ELP
Chipset
Onboard Gigabit
Ethernet
Onboard VGA
IOAT

Software Required

For Windows Server 2008 x64 Installation, the following manage utilities are
required.
Software
MegaRAID Storage
Manager
Intel PROSet Utility
13
Version
2.20.0.64 EasyBUILD 8.0 build 200 (or later)
8.6.0.1002 EasyBUILD 8.0 build 200 (or later)
9.12.17.0 EasyBUILD 8.0 build 200 (or later)
8.240.50.3000 EasyBUILD 8.0 build 200 (or later)
1.2.79.9 EasyBUILD 8.0 build 200 (or later)
Version
2.63-00 EasyBUILD 8.0 build 200 (or later)
13.0.44.0 EasyBUILD 8.0 build 200 (or later)
Altos G540 Installation Configuration Guide
EasyBUILD Version
EasyBUILD Version