Understanding The Basics; Turning Your Tv/Dvd Combo On Or Off; Selecting The Video Input Source - Insignia NS-24LD120A13 User Manual

B. If you select Cable, a message asks if you have
a cable box.
Do you have a Cable Box?
Move OK
E NTE R
• Select No if no cable box is connected.
Your TV scans for available channels. The
scan may take several minutes.
• Select Yes if a cable box is connected. A
message asks how you connected the
cable box to your TV.
How did you connect the
cable box to the TV?
Move OK
E NTE R
• Select AV, Component, or HDMI if you
connected a cable box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coaxial if you connected a cable
box to your TV using a coaxial cable.
Read the message, then press OK to
start the channel scan (VHF channels
only).
C. If you select Satellite Box, a message asks
how you connected the satellite box to your
TV.
How did you connect the
satellite box to the TV?
Move OK
E NTE R
• Select AV, Component, or HDMI if you
connected a satellite box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coaxial if you connected a satellite
box to your TV using a coaxial cable. Read
the message, then press OK to start the
channel scan (VHF channels only).
20
No
Yes
Se lec t Previous Exit
ME NU
E XIT
AV, Component, or HDMI
Coaxial
Se lec t Previous Exit
ME NU E XIT
AV, Component, or HDMI
Coaxial
Se lec t Previous Exit
ME NU E XIT
www.insigniaproducts.com
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight the video input source for your
TV/DVD combo in the INPUT SOURCE list, then
press OK.
• If your TV/DVD combo is connected to an
antenna, cable TV (no box), or cable or satellite
TV box using a coaxial cable, select TV.
• If your TV/DVD combo is connected to a cable
or satellite box using an HDMI cable or HDMI
cable with a DVI adapter, select HDMI 1 or
HDMI 2.
• If your TV/DVD combo is connected to a cable
or satellite box using a component video
cable, select Component.
• If your TV/DVD combo is connected to a cable
or satellite box using a composite video cable,
select AV.

Understanding the basics

Turning your TV/DVD combo on or off

To turn your TV/DVD combo on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV/DVD combo.
The power indicator turns blue.
3 Press (power) again to turn off your TV/DVD
combo. Your TV/DVD combo enters standby
mode, and the power indicator LED turns red.
Warning
When your TV/DVD combo is in standby mode, it is
still receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV/DVD combo does not receive an input
signal for several minutes, it automatically goes into
standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV/DVD combo, then press INPUT.
The INPUT SOURCE list opens.
INPUT SOURCE
Component
HDMI 1
HDMI 2
2 Press or to select a video input source, then
press OK.
or to
TV
AV
DVD
VGA
USB