Insignia NS-24LD120A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 2/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound.
To connect a cable or satellite box using DVI:
1 Make sure that your TV/DVD combo's power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 2/DVI jack on the back of your TV/DVD
combo.
USB HDMI 1 HDMI 2 / DVI
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the back of your
TV/DVD combo and to the AUDIO OUT jacks on
the cable or satellite TV box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Plug your TV/DVD combo's power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite TV box.
7 Go through the Setup Wizard on page 19.
10
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
PC / DVI DIGITAL
VGA AUDIO IN OUTPUT
Back of TV/DVD combo
www.insigniaproducts.com
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV/DVD combo's power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
video jacks on the back of your TV/DVD combo
and the component video out jacks on the cable
or satellite box.
Cables are often
color-coded to match
color-coded jacks.
PC / DVI
AUDIO IN
4 Connect an audio cable (not provided) to the
AV IN L/R AUDIO jacks on the back of your
CO
TV/DVD combo and to the audio out jacks on
Y
the cable or satellite TV box.
Note
•
•
5 Plug your TV/DVD combo's power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite TV box.
6 Go through the Setup Wizard on page 19.
Cable or satellite box
COMPONENT IN
DIGITAL
OUTPUT Y P P VIDEO
B R
Back of TV/DVD combo
The COMPONENT IN video jacks share the
AV IN L/R AUDIO jacks with the AV IN VIDEO
jack.
When you connect the audio using the
AV IN L/R AUDIO audio jacks, the audio output
is analog.
, and P
B R
AV IN
L - AUDIO - R ANT