Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-24LD120A13 User Manual

Insignia 24" LCD TV/DVD Combo
• Advanced Audio—Opens the
Audio-Advanced Audio menu where you can
adjust additional audio options.
Audio.Advanced Audio
TV Speakers
OK
Move
ENTER
Adjust low frequency sound
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. You can select On (default setting)
to play audio through TV speakers, or
select Off to play audio through the
speakers on an external audio system.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• MONO—Select this option if there is
noise or static on weak stereo
broadcasts.
• STEREO—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
You can also press MTS/SAP on the
remote control one or more times to
select the audio mode.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Reset Audio Settings—Resets all audio
settings to factory defaults.
4 Press or to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Select Previous Exit
MENU EXIT
www.insigniaproducts.com

Playing TV audio only

You can turn off the picture on your TV/DVD combo
and listen to the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
On
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Adjust settings to affect picture quallty
2 Press
or OK. The Channels menu opens.
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Auto Zoom
Play the audio with the picture turned off
3 Press
press OK.
4 Press
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
or

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV/DVD combo
searches for channels with signals and stores the
channel information in the channel list. When you
press CH
the next or previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
CHANNELS SETTINGS PHOTOS
PICTURE AUDIO
Energy Savings
OK
Move Select Previous
MENU
ENTER
or to highlight CHANNELS, then press
PICTURE AUDIO CHANNELS
OK
Move Select Previous
MENU
ENTER
or to highlight Audio Only, then
or to select On.
• Audio Only works only when the input source is
TV, and your TV/DVD combo is receiving a
broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
or CH , your TV/DVD combo goes to
00
00
00
00
00
Exit
EXIT
SETTINGS PHOTOS
On
On
Exit
EXIT
25