Understanding The Basics - Insignia NS-29LD120A13 User Manual

Insignia 29" LCD TV/DVD Combo
11 Press or to highlight Antenna, Cable, or
Satellite Box, then press OK.
A. If you select Antenna, your TV scans for
available channels. The scan may take several
minutes.
B. If you select Cable, a message asks if you have
a cable box.
Do you have a Cable Box?
Move OK
E NTE R
• Select No if no cable box is connected.
Your TV scans for available channels. The
scan may take several minutes.
• Select Yes if a cable box is connected. A
message asks how you connected the
cable box to your TV.
How did you connect the
cable box to the TV?
Move
OK
E NTE R
• Select AV, Component, or HDMI if you
connected a cable box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coaxial if you connected a cable
box to your TV using a coaxial cable.
Read the message, then press OK to
start the channel scan (VHF channels
only).
No
Yes
Se lec t Previous Exit
ME NU E XIT
AV, Component, or HDMI
Coaxial
Se lec t Previous Exit
ME NU E XIT
www.insigniaproducts.com
C. If you select Satellite Box, a message asks
how you connected the satellite box to your
TV.
How did you connect the
satellite box to the TV?
Move
OK
E NTE R
• Select AV, Component, or HDMI if you
connected a satellite box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coaxial if you connected a satellite
box to your TV using a coaxial cable. Read
the message, then press OK to start the
channel scan (VHF channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight the video input source for your
TV/DVD combo in the INPUT SOURCE list, then
press OK.
• If your TV/DVD combo is connected to an
antenna, cable TV (no box), or cable or satellite
TV box using a coaxial cable, select TV.
• If your TV/DVD combo is connected to a cable
or satellite box using an HDMI cable or HDMI
cable with a DVI adapter, select HDMI 1 or
HDMI 2.
• If your TV/DVD combo is connected to a cable
or satellite box using a component video
cable, select Component.
• If your TV/DVD combo is connected to a cable
or satellite box using a composite video cable,
select AV.

Understanding the basics

AV, Component, or HDMI
Coaxial
Se lec t Previous
Exit
ME NU E XIT
or to
19