Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source - Insignia NS-28ED200NA14 User Manual

Insignia 28" LED TV/DVD Combo
C If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
• Select HDMI, Component, or AV, then
press OK if you connected a satellite box to
your TV using one of these cables. Read
the message, then press OK to close the
wizard.
• Select Coaxial, then press OK if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press OK to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
14 To watch TV, press INPUT, press
highlight the video input source for your TV in
the INPUT SOURCE list, then press OK.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1, HDMI 2. or
HDMI 3.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component/AV.
• If your TV is connected to a cable or satellite
box using a composite video cable, select
Component/AV.

Understanding the basics

Turning your TV on or off

Selecting the video input source

or to
www.insigniaproducts.com
To turn your TV on or off:
1 Make sure that the power adapter is connected
to a power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator turns red.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power adapter.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2 Press or to select a video input source, then
press OK.
You can also press a Quick Launch Input button to
select the video input source.
• Press TV to select TV (if your TV is connected to an
antenna, cable TV (no box), or cable or satellite TV
using a coaxial cable).
• Press DVD to select the built-in DVD player.
• Press VIDEO to select component or composite
input.
• Press HDMI one or more times to cycle between
the HDMI inputs.
37