Spot Setup; Record Setup; Time Setup; Schedule Setup - Honeywell HRDP4F250 User Manual

SPOT Setup

Record Setup

Time Setup

Schedule Setup

______________________________________________________________________________________________
Document 800-02471 Rev A
02/09
The SPOT Setup display allows the user to define the sequence display for the
Spot Monitor. This allows the Spot Monitor to display only the video necessary
for the person watching the Spot Monitor.
Sequence – ON/OFF [sequences through selected cameras].
Interval – 1 ~ 60 seconds [Set the sequence interval time].
Channel – Select cameras to include in sequence.
Day/Night/Weekend – Adjust the FPS and picture quality for each schedule
individually.
[C] FPS – 0 ~25 [Define a global FPS setting for continuous recording or set
individually for each channel].
[M] FPS – 0 ~25 [Define a global FPS setting for motion/event recording or set
individually for each channel].
Record Mode – Continuous / Motion Event / C/M/E[ALL] /N/A
Quality – Low / Normal / High / Ultra [Define a global quality setting or set
individually for each channel].
Post Recording – 0 ~99 seconds [Recording time after event].
Continuous Frame – Displays the actual FPS / maximum FPS for continuous
recording.
Event Frame – Displays the actual FPS / maximum FPS for event recording.
Night – Set night time (ex. If 18:00 to 6:00 is defined as night time, 6:00 to
18:00 is defined as day time).
Weekend – Define weekend days.
Performance Series DVR User Guide
71