Motion/Event Configuration; Input - Honeywell HRDP4F250 User Manual

Setup

Motion/Event Configuration

Input

______________________________________________________________________________________________
40
Motion / Event Configuration has four sections; Input, Sensor, Action, and
Alarm Monitor. When an event comes in (Input) the DVR records the image
according to its settings (Camera Configuration) and triggers an alarm (Action).
MOTION/EVENT CONFIGUR ATION
CH
1
2
3
4
INPUT
CH – Channels 1~ 4
MOTION – ON/OFF [Specify whether to use motion input or not.]
SENS (Sensitivity) – LOW / NORMAL / HIGH / HIGHEST
AREA – Define the motion detection area.
SENSOR – Associate a sensor with the camera channel.
V-LOSS (Video Loss) – Select a channel to report video loss on.
MOTION SENS AREA SENSOR
ON NORMAL
ON NORMAL
ON NORMAL
ON NORMAL
SENSOR ACTION
SAVE CANCEL
INPUT
V-LOSS
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ALARM MONITOR