Ptz Camera Control; Create Ptz Preset Position - Honeywell HRDP4F250 User Manual

PTZ Camera Control

Create PTZ Preset Position

______________________________________________________________________________________________
Document 800-02471 Rev A
02/09
To control a PTZ camera:
Press the PTZ key to enter PTZ Mode.
1.
2. Press SETUP to open the PTZ SETUP screen.
SPEED SETUP – 1-8 [Set the speed that PTZ cameras move].
PRESET SETUP – MOVE/SET [Create preset PTZ camera positions].
PRESET TOUR – [Create a tour of preset PTZ camera positions].
PATTERN SETUP – [Create a custom PTZ Pattern].
PATTERN TOUR – [Create a Pattern (mimic) tour].
AUTO FOCUS – [Modify Auto Focus settings].
POWER – ON/OFF
LIGHT – ON/OFF
1. Set up a PTZ camera in CAMERA > PTZ CONFIGURATION.
Press EXIT to exit SETUP.
2.
Press the PTZ key to enter PTZ Mode.
3.
4. Select a PTZ enabled camera.
5. Press SETUP to display the PTZ setup menu.
Select PRESET SETUP.
6.
7. Select MOVE to move the camera to the preset position.
8. Select a PTZ PRESET ID number and select OK to save.
Performance Series DVR User Guide
PTZ SETUP CH1
SPEED SETUP
PRESET SETUP
PRESET TOUR
PATTERN SETUP
PATTERN TOUR
AUTO FOCUS
POWER
LIGHT
EXIT SETUP
61