Spot Setup; Record Setup; Time Setup; Schedule Setup - Honeywell HRDPX User Manual

SPOT Setup

Record Setup

Time Setup

Schedule Setup

______________________________________________________________________________________________
Document 800-04765 Rev A
06/09
The SPOT Setup display allows the user to define the sequence display for
individual Spot Monitors. This allows users to use different Spot Monitors to
display only the video necessary for the person watching the Spot Monitor.
Sequence - ON / OFF [sequences through selected cameras]
Interval – 1 ~ 60 seconds [Set the sequence interval time].
Channel - Select cameras to include in sequence.
Day/Night/Weekend – Adjust the FPS and picture quality for each schedule
individually.
[C] FPS – 0 ~25 [Define a global FPS setting for continuous recording or set
individually for each channel.]
[M] FPS – 0 ~25 [Define a global FPS setting for motion/event recording or set
individually for each channel.]
Record Mode – Continuous / Motion Event / C/M/E[ALL] /N/A
Quality – Low / Normal / High / Ultra [Define a global quality setting or set
individually for each channel.]
Post Recording – 0 99 seconds [Recording time after event.]
Continuous Frame –Displays the actual FPS / maximum FPS for continuous
recording
Event Frame – Displays the actual FPS / maximum FPS for event recording.
Night – Set night time (ex. If 18:00 to 6:00 is defined as night time, 6:00 to
18:00 is defined as day time)
Weekend –Define weekend days
Performance Series DVR User Guide
77