Zanussi ZWQ 7100 SO User Manual page 5

pliance will ignore the new selected pro-
gramme. The "Start/Pause" pushbutton flashes
red for a few seconds.
Selecting the spin speed
Press the "Spin" pushbutton to change the spin
speed.
The maximum spin speeds are :
for Cotton, Handwash, Wool, Jeans : 1000
rpm, for Synthetics : 900 rpm, for Delicates,
Blanket : 700 rpm.
At the end of the programme, if you have selec-
ted "Rinse hold"
"Spin" or "Drain"
the cycle and empty the water.
Selecting options
You must select the different options after se-
lecting the programme and before pressing the
"Start/Pause" button (see "Washing pro-
grammes"). Press the desired button(s) : the
corresponding lights come on. If pressed again,
the lights go out. If one of the options is not
compatible with the selected programme, the
"Start/Pause" button flashes red.
"Prewash" option (Prewash)
The appliance runs a prewash at 30°C max.
"Super quick" option (Super quick)
The washing time will be reduced depending
on the programme selected.
"Economy" option
This option allows you to choose a lower tem-
perature programme which is as effective as a
higher temperature wash programme.
"Easy iron" option
If you select this option, the laundry is washed
and spun delicately to prevent any creasing.
This makes ironing easier.
"Rinse plus" option
The washing machine will add one or more rin-
ses during the cycle. This option is recommen-
ded for people with sensitive skin and in soft
water areas.
"Delay start"
This option allows you to delay the start of a
wash programme by 30 minutes, 60 minutes,
www.zanussi.com
, you then need to select a
programme to finish
90 minutes, 2 hours to 20 hours. The selected
time appears on the display for a few seconds.
You can change or cancel the delayed start
time at any time before you press the "Start/
Pause" button, by pressing the "Delay start"
button again ( ' indicates immediate start)
If you have already pressed the "Start/Pause"
button and you want to change or cancel the
delayed start, proceed as follows :
• To cancel the delayed start and start the cy-
cle immediately, press "Start/Pause" and
then "Delay start". Press "Start/Pause" to
start the cycle.
• To change the timer delay period, you must
go through the "Stop"
programme your cycle.
The lid will be locked during the delayed start
time. If you need to open it, you must first pause
the appliance by pressing the "Start/Pause"
button. After closing the lid again, press the
"Start/Pause" button.
Start of the programme
Press the "Start/Pause" pushbutton to start the
cycle ; the corresponding light will come on
green and the "Door locked" light comes on.
It is normal for the programme selector to re-
main stationary during the cycle. The remaining
time appears on the display. If a delayed start
has been selected, the countdown appears on
the display.
The drain pump can operate for a short
time when the appliance fills water.
Interrupting a programme
Adding washing during the first 10 mi-
nutes
When the "Door locked" light is off, you can
add washing by proceeding as follows. Press
the "Start/Pause" pushbutton : the correspond-
ing light will flash green while the appliance is
paused. The lid can only be opened around 2
minutes after the washing machine has come to
a stop. Press the "Start/Pause" pushbutton
again to continue the programme.
Modifying the programme in progress
Before making any changes to the current pro-
gramme, you need to pause the washing ma-
chine by pressing the "Start/Pause" pushbut-
position and re-
5